行業資訊
壓路機在路面壓實過程中的六大技巧
來源：http://m.yuanchuodian.cn/ 日期：2023-06-12
路面壓實施工是公路瀝青路面施工過程中的重要工序之一，瀝青路面的充分壓實對于保證其結構強度，避免路面發生早期損壞，提高路面使用壽命具有重要意義，而傳統的力求路面壓實管理監測主要為事后管控，瀝青路面壓實質量難以控制，且施工完成后處理成本較高，因此在路面壓實質量管理上就非常的困難。
Road compaction construction is one of the important procedures in the construction process of highway asphalt pavement. Adequate compaction of asphalt pavement is of great significance in ensuring its structural strength, avoiding early damage to the pavement, and improving the service life of the pavement. However, traditional road compaction management and monitoring mainly focus on post control, making it difficult to control the compaction quality of asphalt pavement, and the cost of treatment after construction is high, Therefore, it is very difficult to manage the quality of road compaction.
在路面施工的過程中，除了在施工過程中對質量進行監控之外，壓路機在施工過程中的施工技巧也非常重要，它對于路面的施工質量也有一定的影響。下面濟南壓路機租賃人員來講講其中的技巧：
In the process of road construction, in addition to monitoring the quality during the construction process, the construction skills of road rollers are also very important, and it also has a certain impact on the construction quality of the road surface. Below, Jinan roller rental personnel will explain the techniques:
1、無論是上坡還是下坡，瀝青混合料低下一層必須清潔干燥，而且一定要噴灑瀝青結合層，以避免混合料在壓實時滑移。
1. Whether on an uphill or downhill slope, the lower layer of asphalt mixture must be clean and dry, and the asphalt binder layer must be sprayed to avoid slipping during compaction.
2、無論是上坡壓實還是下坡壓實，壓路機的驅動輪均應在后面。
2. Whether it is uphill compaction or downhill compaction, the driving wheels of the roller should be at the rear.
3、上坡壓實時，壓路機起步、停止和加速都有平穩，避免速度過高或過低。
3. When compacting uphill, the roller should start, stop, and accelerate smoothly to avoid excessively high or low speeds.
4、上坡壓實前，應使混合料冷卻到規定的低限溫度，而后進行靜力預壓，待混合料溫度降到下限時，才采用振動壓實。
4. Before uphill compaction, the mixture should be cooled to the specified lower limit temperature, and then static preloading should be carried out. Vibration compaction should only be used when the temperature of the mixture drops to the lower limit.
5、下坡壓實時應避免突然加速和制動。
5. When compacting downhill, sudden acceleration and braking should be avoided.
6、在坡度很陡的情況下進行下坡壓實時，應先使用輕型壓路機進行預壓，而后再使用重型壓路機或振動壓路機進行壓實。
6. When performing downhill compaction on steep slopes, a light roller should be used for pre compaction first, and then a heavy roller or vibrating roller should be used for compaction.
壓路機在路面壓實過程中的六大技巧相關事項就講解到這里了，希望能夠給您好的幫助，更多事項就來我們網站http://m.yuanchuodian.cn咨詢！
That's all for the six tips and related matters of road rollers in the process of road compaction. We hope to provide you with good help. For more information, please come to our website http://m.yuanchuodian.cn consulting service
公司地址：濟南市商河縣賈莊鎮民營經濟創業園
公司名稱:永誠廣建公路材料（山東）有限公司 
備案號：